2018 H&S Manufacturing Hay Machine II

Call for Price

H&S Manufacturing
Hay Machine II



  • The H&S Haymachine II is the easiest machine to use to effectively reduce drying time of hay with the least amount of handling, and as a result, to increase considerably the nutrient value of your hay crop.
  • The Haymachine II moves and turns over the windrow off the wet ground onto dry ground and at the same time, tedding the windrow into a fluffy windrow to dry fast.
  • A 12" gauge wheel on the front of the rake beam provides for proper rake tooth ground pressure. No adjustment needed.
  • Each rake wheel is mounted independently allowing them to better follow the contours of the ground.
  • A hand crank adjusts the tedder reel height.
  • A cam lever is used to adjust the aggressiveness of the tedder teeth for a fluffier windrow.
  • The speed of the hydraulically driven tedder reel is controlled by manually adjusting the control valve for crop and field conditions.
  • The easy tongue adjustment system is used to give the operator different offset positions for tedding and a position for storage.
  • The hydraulic cylinder stops can be adjusted to limit the distance that the rake wheel arm swings out.
  • An optional 4th raking wheel increases the raking width from 4 1/2' to 6' for your extra wide windrows.
  • Tedding Width: 7'
  • Overall Width Transport Position: 127"
  • Weight: 1,680 lb.
  • Number of Teeth, Rubber Mtd.: 56
  • Overall Length With Hitch: 146"
  • Wheels: 4 Bolt, 15" x 5" With 15" Tires
  • Drive: Hydraulic Drive On Tedder Reel
Warranty: See Operators Manual for warranty details and limitations. H&S reserves the right to change its products or the description at any time without notice or obligation. Models and specifications are subject to change without prior notice.



146 in.
127 in.
Working Width
7 ft.
1,680 lb.

Related Products