2018 H&S Manufacturing HPV4155 Hydraulic Push Manure Spreader

Call for Price

H&S Manufacturing
HPV4155 Hydraulic Push Manure Spreader



  • Both sizes are available with a choice of horizontal or vertical beaters.
  • Vertical beaters feature ‚ÄúREVERSE FLIGHTING" on the top 21" of the beater flighting. This patented feature allows for an even spread pattern of material.
  • All Hydraulic Push models use solid virgin grade poly with UV inhibitor, for the floor and sides allowing less friction.
  • The hydraulic endgate has 2 cylinders with 3/8" hose and pipe for faster operation in cold weather.
  • Horizontal beater models feature a top beater as standard equipment.
  • Heavy duty rectangular tubing is used for the pole to ensure strength and long life. Structural channel floor supports spaced 9 1/2" apart are used for maximum floor support.
  • #80 chains are used for strength and long life and easy open shields makes lubrication easy.
  • The HP's PTO beater drive system is driven by the unique center drive system that consists of a straight shaft off the PTO underneath the manure spreader to an angle gearbox in the rear, and over to the beater drive sprocket.
  • The Hydraulic Push-Off System on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
  • Beater blades are replaceable and the beater assembly is removable for stockpiling manure.
  • Removal of either beater assembly is done by simply removing the mounting bolts, a drive chain and disconnecting the auto-oiler hose on the vertical beater model.
  • Beater gearboxes are safely mounted on the top side of the vertical beaters rather than the bottom to avoid being destroyed by foreign objects.
  • An Auto-oiler for the vertical beater drive chains is standard equipment.
  • The vertical beater features a quick release clean out pan.
  • Capacity - Old Rating: 550 bu.
  • Capacity Cu. Ft, Struck Level: 430
  • Side Loading Height: 81"
  • 2nd or Vertical Beater Height: 121 1/2"
  • Height-Top of Hyd. End Gate (w/o Hook): 85 1/2"
  • Height-Top of Screen (Vert. Beater Only): 117"
  • Inside Width: 72"
  • Inside Length: 16'
  • Inside Depth: 53"
  • Overall Width w/ Tires: 10' 2"
  • Overall Length: 27' 5"
  • Standard Number of Beaters: 2
  • Horizontal Beater Diameter/ Lower: N/A
  • Horizontal Beater Diameter/ Upper: N/A
  • Vertical Beater Diameter: 34"
  • Replaceable Beater Paddles: Yes
  • Removeable Beater Assembly: Yes
  • Standard PTO Speed: 1000 RPM
  • Optional PTO Speed: 540 RPM
  • PTO Overload Protection: Shear Bolt
  • Hydraulic Push Cylinder Diameter: 4 1/2"
  • Hydraulic Push Cylinder Hose Diameter: 1/2"
  • Hub: 10 Bolt
  • Spindle Size: 3"
  • Tire Size: 425 x 22.5
  • Hydraulic End Gate: Standard
  • Cylinders On Hydraulic End Gate: 2 W-3/8" Hose
  • Rear Pan: Standard
  • Jack: Standard
  • Wood Side Rails: Standard
  • Weight w/ Tires: 11,000#
Warranty: See Operators Manual for warranty details and limitations. H&S reserves the right to change its products or the description at any time without notice or obligation. Models and specifications are subject to change without prior notice.



11,000 lb.
Hopper Capacity
430 cu.ft.
Tire Size
425 x 22.5

Related Products